Porsche 911 GBG Backdate Part 3

Porsche 911 GBG Backdate Part 3


With Part 2 of the build page getting too long, welcome to Part 3 of the Porsche 911 GBG Backdate


We left Part 2 with Olly having fitted the engine and we pick up the project in part 3 with the wheels and tyres finally on the car It was a great moment to finally get them on the car. We still need to set up the suspension geometry but at last we can see the car coming together. Olly has also fitted all the hoses for the fuel and cooling systems, got to love the look of these braided hoses.
With the wheels now on we wheeled it into one of our larger bays where we will be fitting and setting up the AT Power Throttle bodies. Not only does this kit look like a work of art, it will also help push the Porsche along very nicely using the very latest modern tech.
To start off with the guys fitted the newly sprayed tin wear and fan back on the block.
After about just over 80 man hours the engine was ready to start up and tune.
Olly has handed to car over to Craig at CW Trimming who will be making a custom interior. We have opted for a black interior with Alcantara and check accents. Craig will also be cutting and fitting bespoke carpets. His workshop gave me the chance to get a few shots of the car now the wheels are on, and i have to say its looking very nice.
We had ordered in a full carpet set for the Porsche but like with most aftermarket parts it just didn’t fit, so Craig has opted to make custom carpets. Olly and myself popped over to see the progress and run through some other ideas we had for the door cards and i have to say the new bespoke carpets fit so much better.
All the carpets are now in and the seats centres have been re-trimmed in our chosen black and grey cheque. We have also added a pocked in the door cards upholstered in the same black and grey check to match the seats. The tops of the door cards have been upholstered in the same Alcantara as used on the dash. The custom carbon inserts that Olly made for the dash as getting binned as we are not happy with them and are getting replaced with a frame that will have an inlay made from the black and grey cheque to tie in nicely with the rest of the interior.
The front bumper has been sprayed and is now on the car, Kyle has given the whole front end a fuel detail and polish and the car is ready to get shipped to Vinyl one who are wrapping the whole front end in paint protection film to protect it.
With the paint protection wrap now on, Olly and myself took a trip over to Vinyl 1 to see the results. We have to say Jamie has done an excellent job, as usual, you don’t even notice it on the car. We now feel more comfortable putting the 500 test miles on her.
The struct brace has been added under the bonnet and the spare wheel has been painted to match the other wheels. We have also fabricated a box go over the battery and covered it in the tartan to match the interior. Things are not looking very tidy under the bonnet now.
The back bumper has now been sprayed and fitted to the car. There has been many man-hours fiberglassing and shaping the bumper to allow it to fit and work with the new modified shell. Unfortunately due to Covid Pete has not been able to record the process so you will just have to check out the finished results.
The boot lid has also been fitted along with the grill and a custom one-off perspex panel that sits behind the grill. This covers the throttle body trumpets so that no water can get down them, but also has cutouts to allow air into the engine.
Olly has put some test miles on the backdate and we have to say it is such a tight car. After a nut and bolt check, the car was loaded up to head to Surrey Rolling Road for a tune.
To get the engine and throttle bodies completely dialed in, we took the backdate to Surrey Rolling Road where after about 3 hours of programming and testing we managed a very smooth 245 hp at the wheels which is pretty close to 300bhp at the flywheel. More than enough to push a 900kg car along nicely and smoothly. Big thanks to Chris and Charlie at Surrey Rolling Road for doing such a great job.
With the car dialed in and back at the shop, we did a finished photoshoot and video (watch this space) before it was given a full clean, detail and ceramic coating. It was then loaded onto a trailer and transported down to Poole for the final hand over to Paul the owner.
What a project to be involved in, we are really proud of the way this Backdate turned out. There has been a lot of blood, sweat, tears, and 100’s of man-hours to create this beauty. Big up to all the guys at the shop who have worked their socks off. Also, big thanks to Paul, the owner who let us have free reign on the car and he absolutely loved it.

One reply on “Porsche 911 GBG Backdate Part 3

  • Paul

    WHAT CAN I SAY GUYS ? The car looks AMAZING and I am over the moon with the end result. Olly said he had a vision for a car in his mind and I have to say it was worth trusting him and the great team to get on and deliver a fantastic car. Olly and the team have been a pleasure to deal with and I love the fact every part of the build is either photgraphed or put on video on the Golding Barn blog to show where the project started to the final finished car and final hand over.
    Everywhere I go in the car I have people coming up to me saying WOW that looks AMAZING and who did it. If anyone is thinking of using Golding Barn Garage for any work or project I can not recommend them more highly. I saw the amazing work they did on the restoration of the Porsche 911 2.4s in Viper Green featured in Classic Porsche magazine and after speaking to the owner I contacted Olly. As soon as we spoke I knew I could trust Olly to deliver his vision and a one of a kind Porsche.
    Look out for the car which is going to be featured in different Porsche magazines very soon.
    Thanks very much to all involved. Couldn’t be more happy with the end result. Paul


Leave a Reply

Your email address will not be published. Required fields are marked *